MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497)

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498)

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500)

Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm

The Testomat® LAB TH devices determines the water hardness (residual total hardness) fully automatically by use of titration and has been developed for monitoring the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water, here in a package for monitoring two measuring points. In view of the fact that the Testomat® LAB TH total water hardness analysers were developed for use in multi-parameter systems or for connection to a higher-level control system, we hereby offer you both Testomat® LAB TH analysis devices in combination with the NeoTecMaster®, which was specially developed by our company, as a complete solution at a preferential price. The 4-channel NeoTecMaster® multi-parameter controller included in this package enables the processing of up to four measurement signals in this version. A signal input on the NeoTecMaster® , in this case the RS232 interface and one additional RS232 interface on the included NeoTec Slave module , are used by both Testomat® LAB TH to display the measured values, the trend and the status messages on the 5 inch screen. In addition to the on board RS232 interface, the NeoTecMaster® also has a Modbus RTU input, which you can use freely after brief technical consultation with us. (Pre-check whether your existing measurement technology to be integrated requires adjustments). The NeoTecMaster® can be systematically supplemented with further optional NeoTec modules (function / signal converter modules) as required, thus enabling the future realisation of further control concepts in a flexible manner. A module that fundamentally expands the range of functions and is already included in the scope of delivery is our NeoTec slave relay module with which you can add potential-free relay contacts to the overall system. You can freely assign these to the incoming measurement signals and thus, for example, implement limit value-related control concepts, as well as output measurement-related messages. Further advantages of the NeoTecMaster:  Simple operation Integration of the Testomat® world of instruments, here in conjunction with two Testomat® LAB TH Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housing  Modular range of functions can be extended by NeoTec slave and signal converter modules (measurement, control, regulation) Available as built-in or surface-mounted variant Structured continuous data recording on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format In addition, there are proven Testomat® LAB functionalities:  Optimised water detection based on an optical measuring method  RS232 interface for transmission of measured values and error messages  Import and export of settings (basic programming)  Logging of measurement data and messages/alarms via integrated SD card or optionally usable SDHC card (2GByte)  Firmware update via SD card  Execution of parameterisation by means of SD card or "Service Monitor" software via mini-USB (on the unit side) to USB 2.0 (e.g. PC/notebook)  Multilingual software menu in German, English, French, Dutch, Portuguese  Integrated self-test with continuous monitoring  Automatic venting of the indicator line  Compact design Performance profil Testomat® LAB TH:  High-precision titration by means of piston metering pump  Reliable and low-maintenance operation  Minimal indicator and water consumption  Analogue output 4 - 20 mA for transmission of measured values  Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l  Collective alarm output  Indicator quantities: 500 ml bottles  Analysis trigger:  - Automatic interval operation (interval pause adjustable from 0-255 minutes)  - External analysis input (start/stop)  - Manual start Optional accessories available:  OLED display  Protective cover to increase the IP protection class of the Testomat® LAB TH devices  NeoTecMaster instrument cover

Contains:  2 x Sight glass windows 30x33 x Flat gasket 24x2 EPDM 601 x Bottle insert for screw cap and push-fit suction tube, 100 ml bottle1 x Bottle insert for screw cap and push-fit suction tube, 500 ml bottle1 x brushes set

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Note: The system shown, consisting of two cabinets, is the fully equipped version of our system. The basic price is therefore supplemented by the selected options.The modular water treatment system was developed especially for the outpatient care sector. While retaining the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the quantities required in different outpatient centres, as well as to the initial water quality including any treatment steps on the part of the suppliers. The modularity offers the decisive advantage that the overall concept can be adapted to the respective water type or composition as well as the treatment processes of the supplier.PrincipleDue to its modular design, the water treatment system can be adapted to the different conditions in the outpatient care sector. This includes different degrees of water hardness, quantities required in outpatient centres, the initial water quality and the treatment steps. Optimal water treatment is relevant for reliable availability of instruments for operations. In addition, the protection of the instruments and the equipment technology goes hand in hand with this. Furthermore, any damage to the instruments or equipment is always directly related to the issue of patient safety. For the treatment of the water, a pre-filtration, a softening system, a reverse osmosis system with a 100-litre permeate tank including a surge tank and sterile filter as well as a permanent conductivity and silicate monitoring by a Testomat® 808 SiO2 at the blending bed and a recirculation system with integrated UV system and pyrogen filter are used.Waste water discharge via brine lifting unitAs an optional component, the treatment plant can be extended by an integrated wastewater lifting unit, which conveys the produced and collected wastewater into the sewage system. The main wastewater volume flows are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis. The lifting unit also collects the discontinuously occurring wastewater flows from the silicate meter, the system separator and the rinsing water that occurs when the input filters (especially activated carbon filters) are changed.Shut-off via system separatorThe installation of a system separator is mandatory to protect the drinking water network from contamination by treated water or changes in the natural composition of the drinking water fed in due to the technical treatment of the latter. The unit has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection.Rittal enclosure systemsThe system components are installed in two Rittal enclosures. Rittal is a leading manufacturer of enclosure systems, offering a wide range of solutions for the secure storage and protection of electronic components and equipment. Rittal enclosure systems are available in a range of sizes, designs and configurations, and are suitable for various application areas such as IT infrastructure, industrial automation, power distribution and telecommunications.Rittal's enclosure systems are characterised by high quality, functionality and flexibility. Rittal cabinets are made from high-quality materials and offer a robust design that ensures reliable protection for the equipment inside. They are protected against dust, dirt, moisture, vibration and other environmental influences. Rittal enclosure systems are modular, which means they can be adapted to specific requirements and available space. They offer a wide range of options for mounting accessories such as shelves, cable management, climate control units and power distribution units. Rittal's enclosure systems offer various security features such as lockable doors, security locks and access control systems to prevent unauthorised access to equipment and ensure data security. Only a minimum floor space of 1.60m x 1m is required to install the HeylNeomeris modular water treatment system. It consists of 2 cabinets, each 80cm wide and 60cm deep. It is possible to work with double doors and thus, due to the depth of 60 cm and a double door with a dimension of 40 cm, an area of 1 m in the depth of the room results.The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating.Standard equipment of the systemTestomat® 808 SiO2 Silicate Measuring DeviceA Testomat®808 SiO2 silicate is used for permanent silicate monitoring. The Testomat®808 SiO2 is a measuring instrument that is used to determine the silicate content in water. The measuring principle of the Testomat®808 SiO2 is based on the so-called molybdenum blue method. Here, the silicate in the water reacts with a reagent solution containing molybdenum. This reaction produces a blue colour whose intensity is proportional to the silicate content. The measuring device records the colour intensity by means of an optical sensor and converts it into a measured value that represents the silicate content of the water. The Testomat®808 SiO2 is housed in a compact casing that includes a user interface, display and control elements as well as connections for water samples and drainage.The use of the Testomat 808®SiO2 ensures reliable compliance with the limit value for SiO2 of 0.4 mg/l recommended by the DGSV and AKI. In the event of a limit value being exceeded, it is possible to transmit this to the optionally available NeoTecMaster® or to directly activate an optical warning element. Continuous monitoring of the silicate content is necessary to effectively prevent any deposits and subsequent damage to the device technology and instruments.By using the Testomat®808 SiO2, companies can continuously monitor the silicate content and take appropriate measures to prevent deposits if necessary.Optional components of the system UV Disinfection MiniUV disinfection is used in water treatment to inactivate the water from any microorganisms such as bacteria, viruses and protozoa. UV stands for ultraviolet radiation, which is produced by special UV lamps. The principle of UV disinfection is based on inactivating the DNA or RNA of the microorganisms, preventing them from reproducing and causing disease. UV disinfection is relevant because UV radiation is effective against a wide range of microorganisms, including bacteria, viruses and protozoa such as Giardia and Cryptosporidium. A high inactivation rate can be achieved and most pathogenic organisms in the water can be killed. Unlike other disinfection methods such as chlorination or ozonation, UV disinfection does not require the addition of chemicals to the water. It produces no unwanted by-products and does not alter the taste or smell of the water. UV disinfection is a reliable method of killing microorganisms. As long as the UV lamp is properly maintained, the effectiveness of the disinfection remains constant. Since no chemicals are used in UV disinfection, there are no harmful residues in the water or the environment. It is an environmentally friendly disinfection method that reduces the ecological footprint of water treatment. It is important to note that UV disinfection is an effective method of killing microorganisms but is not used to remove pollutants, particles or chemical contaminants in the water.The optional UV system is integrated into the plant's continuously operating recirculation system.Pyrogen filterA pyrogen filter is a special type of filter used in water treatment to remove pyrogens from water. Pyrogens are substances that can cause an immunological reaction in the body, especially an increase in body temperature. They are usually endotoxins released by bacteria such as Escherichia coli (E. coli). The pyrogen filter consists of a filter element that has a very fine pore size, typically in the range of 0.1 to 0.2 microns. This allows the filter to effectively retain particles and microorganisms, including pyrogenic bacteria that may be present in the water. In the modular water treatment system, the pyrogen filter is used after other pre-treatment stages such as filtration and disinfection.After the water has been cleaned of particles and microorganisms, it is passed through the pyrogen filter to remove possible pyrogens. Pyrogen filters are particularly important in industries where the absence of pyrogens in the water is crucial, for example in the ambulatory care sector to ensure optimal quality of instrumentation for surgery. Overall, pyrogen filters play an important role in water treatment to ensure the quality and purity of water and to minimise potential exposure to pyrogenic substances.The optional pyrogen filter is located directly behind the UV unit and can thus also be integrated into the unit's continuously operating recirculation system.Lifting systemThe lifting system is used for the reliable discharge of the wastewater volumes from the individual process steps. The main volume flows are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis. The lifting unit also collects the discontinuously occurring wastewater flows from the silicate meter, the system separator and the rinsing water that occurs when the input filters (especially activated carbon filters) are changed.The use of a lifting unit is recommended if the wastewater pipes cannot be connected to a ground-level wastewater connection.NeoTecMaster® 5 inch with housingData acquisition as well as its visualisation and processing are only some of the relevant topics in the environment of modern water treatment. The networking of different measuring systems and their integration into the process automation is an elementary component. The NeoTecMaster® was developed specifically for this task and is a multi-parameter system that is open to all manufacturers.Data recording and visualisation of the NeoTecMasterThe visualisation of the multicontroller is done via trend graphs. All set parameters can be selected and deselected. All recorded data is saved on a USB stick and can also be accessed online within the company network. You can monitor and visualise up to 8 parameters via the shift key.The NeoTecMaster is available with a 5 -inch screen and additional IP 66 protection class housing.The NeoTecMaster® Multicontroller concept is a basic building block for every water treatment system, also for systems in outpatient clinics.Viewing windowRittal enclosures are fitted with viewing windows, which provide an overview of the measurement technology. The use of viewing windows in Rittal enclosure systems has several advantages. They enable visual inspection of the equipment located in the enclosure without the need to open the enclosure. This facilitates monitoring, maintenance and troubleshooting of components without compromising enclosure integrity. Viewing windows are usually made of a transparent material such as glass.Notes: Viewing windows in Rittal enclosures are only available for single-leaf doors. When selecting this option, please note that the required minimum room depth increases from 100 cm to 140 cm.LightingFurthermore, interior lighting with RGB colour tones is optionally available for this design variant. These can be placed independently depending on the equipment of the cabinet systems. Please note that this option is only available for cabinets with a viewing window.Aqua-Stop (solenoid valve shut-off)An Aqua-Stop is a safety mechanism used in water supply systems to stop or restrict the flow of water when a fault or leak occurs. It is usually an automatic closing mechanism that closes the water supply valve to prevent major water damage.A solenoid valve is a type of shut-off valve controlled by the use of an electromagnetic field. In water treatment, a solenoid valve is used to shut off or control the flow of water. The solenoid valve consists of an electromagnetic coil system and a valve mechanism. By applying an electrical voltage to the coil, a magnetic field is generated which influences the valve mechanism. Depending on the application, the solenoid valve can be opened or closed to allow or block the flow of water. In combination, additional safety and control over the water flow can be provided.The Aqua-Stop is located directly as the first element behind the main water connection of the system. The associated solenoid valve is coupled with two sensors, one of which continuously monitors the floor pans of both cabinet systems. The floor pans are an integral part of the cabinet systems. Collecting trayThe floor pans are an optional part of the cabinet systems.

Reliable and economical demineralized water treatment (demineralized water) is indispensable in sterile processing. However, processes, system status and operating costs are subject to constant change. As part of our basic on-site analysis, you will receive a well-founded and independent assessment of your existing demineralized water treatment system - directly at your location. Our consulting approach aims to identify optimization potential at an early stage and make it economically viable. Among other things, we look at Plant technology and dimensioning Equipment and feed technology Instruments used In sensitive environments such as hospitals, the quality of the demineralized water used is crucial - especially in areas such as sterile goods processing, laboratory diagnostics or medical technology. On request, we can also carry out targeted and professional water sampling at representative sampling points for a fee. Some of the water samples taken are analyzed on site using photometric measurements and then sent to an accredited laboratory. The results are documented in a clearly structured report - including an assessment and specific recommendations for optimization.

Focus on efficiency, quality and safety The supply of demineralized water (demineralized water) is of central importance in many areas of a clinic - for example in central sterilization, laboratory analysis or medical technology. At the same time, the requirements for efficiency, operational safety and hygiene are constantly increasing. Our on-site process analysis provides you with a structured evaluation of the existing demineralized water treatment - with a focus on efficiency, supply reliability and compliant implementation. Our consulting approach includes, among other things System survey and weak point analysis Recording the entire process chain - from the raw water supply to softening, desalination, filtration, storage and distribution systems. Comparison with the actual water demand Checking whether system capacities, retention times and storage volumes match the current and future usage situation. Evaluation of technical and organizational interfaces z. e.g. transfer points to medical technology, automatic rinsing cycles, instrument logistics, redundancy concepts, etc. Risk analysis with regard to microbiological and technical weak points incl. recommendations for sampling, avoidance of downtime contamination and material safety. Economic efficiency analysis Consideration of e.g. use of chemicals, personnel costs and optimization possibilities. As part of our process analysis, we work with you to determine The relevant withdrawal points in the supply system (e.g. after the demineralization plant, at points of consumption, in the return area) The correct sampling technique Possible influences on the measurement results (e.g. dead volume, stagnation, material compatibility) Requirements for microbiological and chemical-physical analysis Adapted to the medical requirements of the facility The aim of sampling is to obtain a realistic picture of the water quality in the facility and to identify potential risks at an early stage. Our independent analysis supports you in complying with regulatory requirements, strengthening internal quality assurance measures and ensuring the long-term operational safety of your demineralized water treatment. The results are documented in a clearly structured report - including an assessment and specific recommendations for optimization. Our process analysis creates transparency, identifies optimization potential and forms the basis for well-founded investment decisions or quality assurance measures. You receive clear documentation with specific recommendations for action - practical, independent and tailored to your clinic.

The reliable supply of demineralized water (demineralized water) to the AEMP is a critical factor for the flawless reprocessing of medical devices. Decision-makers in hospitals are faced with key questions: What are the requirements for water quality? Which pipe materials are suitable? How can a standard-compliant, hygienic and economical solution be planned and implemented? We support you in all project phases - from technical planning to material selection and implementation - with the following focal points: Determination of demand & load profiles: Analysis of peak consumption (e.g. washer-disinfectors, autoclaves), design of water treatment and storage solutions according to AEMP capacity. We take into account not only current but also future requirements. Requirements of current DGSV and AKI guidelines: Ensuring compliance with the required limit values for conductivity and silicates. Line design & material selection Technology concept: selection of suitable DI system technology Economic efficiency analysis: focus on life cycle costs, energy efficiency and maintenance costs. Our manufacturer-independent advice ensures that your investment functions reliably, compliantly and efficiently in the long term - in the interests of patient, operator and process safety.

The regular validation of the entire reprocessing process and its repeated implementation in the event of interventions or changes within the reprocessing process is an essential instrument for demonstrating process reliability. In the course of our work as technical experts, we verify the overall process, assist you with sustainable documentation, continuously monitor the effectiveness of the measures introduced, coordinate the involvement of all process participants and make recommendations for the involvement of authorised external accredited bodies and specialist companies.

Our Neomeris conductivity cell with 12mm connection is used for the determination of the electrical conductivity in aqueous solutions.  Inside the T-piece is the two-electrode measuring cell without temperature compensation. The installation is easy and fast due to the John Guest connectors. We recommend the use of the product in the fields of distillate, condensate, ultrapure water as well as fully demineralized water. Technical data Material Housing: POM T-piece John Guest ½" Material electrodes: V4A 4571 Cell constant: C = 0.1 +-5% Max. operating pressure: 6 bar Max. operating temperature: 60°C Electrical connection: - brown electrode, outer sheath - white Electrode, inside - blue: shieldCable length: 2.5 meters

Technical data: Screw-in thread: 1/2 "Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=0.1 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white

Technical data: Screw-in thread: 1/2 "Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=1.0 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white

Technical data: Screw-in thread: 3/4"Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=0.1 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white

Technical data: Screw-in thread: 3/4"Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=1.0 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white