This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. emec LOTUS MINI injection valve 1/2" - 4 x 6 PVDF+FP+CE 

This injection valve made of polyvinylidene fluoride (PP), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2"- 4x6 (PP+EP+CE) Opening pressure: 0.3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2"- 4x6 (PVDF+FP+CE+C276) Opening pressure: 3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2" - 6x8 PVDF+FP+CE+C276, 0.3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. emec LOTUS MINI injection valve 1/2" - 6X8 PVDF+FP+CE + extension 10CM

Dosing lance made of PP (polypropylene) Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality Emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application: The EMEC LOTUS MINI LINI-D ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PP (polypropylene), a high-quality plastic O-rings and lip seal: These are made of EPDM (ethylene propylene diene rubber) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 130°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x6 mm Dimensions: Width: 12 cmLength: 78 cmWeight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality Emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application:The EMEC LOTUS MINI LINI-D ½" is particularly suitable for applications where precise dosing is required, such as water treatment.Materials:  Body: - The dosing lance is made of PP (polypropylene), a high-quality plastic  O-rings and lip seal: These are made of EPDM (ethylene propylene diene rubber) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour.Immersion depth: The immersion depth of the lance is variable: 20 - 160 mmOperating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 130°C).Process connection: The dosing lance has a ½" process connectionHose connection: the hose connection is 4x6 mm Dimensions:  Width: 12 cm  Length: 78 cm  Weight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application: The EMEC LOTUS MINI LINI-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals. O-rings and lip seal: These are made of FKMB (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 110°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 6x8 mm. Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve.  Area of application: The EMEC LOTUS MINI LINI-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals. O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 110°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 9x12 mm Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve.  Area of application: The EMEC LOTUS MINI LINI-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 110°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x8 mm Dimensions: Width: 12 cmLength: 78 cmWeight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality Emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve.  Area of application: The EMEC LOTUS MINI LINI-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 110°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x6 Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Field of application: The EMEC LOTUS MINI LINIR-D ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PP (polypropylene), a high-quality plastic Ball valve: PVC O-rings and lip seal: These are made of EPDM (ethylene propylene diene rubber) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x6 Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

The ½" injection nozzle is specially designed for the precise dosing of sodium hypochlorite in drinking water. With its automatic cleaning system, it ensures reliable and efficient performance. [#dspacer#] Area of application: The EMEC LOTUS MINI LINIR-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals Ball valve: PVC O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x6 mm Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

LINIR-V 1/2"- 6x8 (PVDF+FP+CE) dosing lance made of PVDF The ½" injection nozzle is specially designed for the precise dosing of sodium hypochlorite in drinking water. With its automatic cleaning system, it ensures reliable and efficient performance  [#dspacer#]  Area of application: The EMEC LOTUS MINI LINIR-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals Ball valve: PVC O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 6x8 mm Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

The ½" injection nozzle is specially designed for the precise dosing of sodium hypochlorite in drinking water. With its automatic cleaning system, it ensures reliable and efficient performance.  Area of application: The EMEC LOTUS MINI LINIR-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals Ball valve: PVC O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 8x10 mm Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

The 3/4’ injection nozzle is specially designed for the precise dosing of sodium hypochlorite in drinking water. With its automatic cleaning system, it ensures reliable and efficient performance. Field of application: The EMEC LOTUS MINI LINIR-V 3/4’ is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals Ball valve: PVC O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 120 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 10 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a 3/4’ process connection Hose connection: the hose connection is 13x16 mm Dimensions:  Width: 12 cm  Length: 78 cm  Weight: 800g

LINIR-V 3/4" dosing lance 8X10 PVDF+FP+CE The 3/4" injection nozzle is specially designed for the precise dosing of sodium hypochlorite in drinking water. With its automatic cleaning system, it ensures reliable and efficient performance.  Field of application: The EMEC LOTUS MINI LINIR-V 3/4" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals Ball valve: PVC O-rings and lip seal: These are made of FKM B (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 120 litres per hour. Immersion depth: The immersion depth of the lance is max. 55 mm Operating range: The dosing lance can be used at a maximum pressure of 10 bar and a temperature of 25°C (or 3 bar at 50°C). Process connection: The dosing lance has a 3/4" process connection Hose connection: the hose connection is 8x10 mm Dimensions: Width: 12 cm Length: 78 cm Weight: 800g

Service set LOTUS A/MINI 8 / 20 for annual maintenance consisting of: 2 dosing heads VIS pumps acid/sodium chlorite - 4x6 (PVDF+FP+CE)2 PTFE diaphragms type A/I/J, VIS pumps acid/sodium chlorite1 pc. Dosing head VIS pump water dilution - 4x6 (PVDF+FP+CE)1 PTFE diaphragm type PCS/K, VIS pump water dilution3 pcs. non-return valve ½" (PVDF+FP+CE) 0.3 bar5 O-ring FPM for hose connection 1/2"1 pc. MFKT/V - 4x6 Multifunction valve (chlorine dioxide)1 pc. Injection valve 1/2" - 4x6 (PVDF+FP+CE+C276)2 pcs. service set FPM red/blue for suction lances LASP42 m dosing hose 4x6 PVDF10 m suction hose 4x6 PVC